KVS-Controlador de caudal de aire

layer

Type RN-Ex

 

Circular, mechanical self-powered volume flow controllers for the control of supply air or extract air in constant air volume systems, approved and certified for potentially explosive atmospheres (ATEX)

  • ATEX-compliant construction
  • Approved for gases, mists, vapours and dusts in zones 1, 2, 21 and 22
  • Volume flow rate can be set using an external scale, no tools required
  • No on-site test measurements required for commissioning
  • Suitable for airflow velocities of up to 12 m/s
  • Any installation orientation
  • Casing air leakage to EN 1751, class C


Optional equipment and accessories

  • Acoustic cladding for the reduction of case-radiated noise
  • Secondary silencer Type CA for the reduction of air-regenerated noise

leer más

layer

Type EN-Ex

 

Rectangular, mechanical self-powered volume flow controllers for the control of supply air or extract air in constant air volume systems, approved and certified for potentially explosive atmospheres (ATEX)

  • ATEX-compliant construction
  • Approved for gases, mists, vapours and dusts in zones 1, 2, 21 and 22
  • Suitable for volume flow rates up to 12,096 m³/h or 3,360 l/s
  • Volume flow rate can be set using an external scale, no tools required
  • High control accuracy
  • No on-site test measurements required for commissioning
  • Suitable for airflow velocities up to 8 m/s
  • Casing air leakage to EN 1751, class C


Optional equipment and accessories

  • Acoustic cladding for the reduction of case-radiated noise
  • Secondary silencer Type TX for the reduction of air-regenerated noise

leer más

layer

Type RN

 

Circular self-powered volume flow controllers for the control of supply air or extract air in constant air volume systems

  • Volume flow rate can be set using an external scale, no tools required
  • High control accuracy
  • No on-site test measurements required for commissioning
  • Suitable for airflow velocities of up to 12 m/s
  • Any installation orientation; maintenance-free
  • Casing air leakage to EN 1751, class C


Optional equipment and accessories

  • Acoustic cladding for the reduction of case-radiated noise
  • Secondary silencer Type CA, CS or CF for the reduction of air-regenerated noise
  • Hot water heat exchanger Type WL and electric air heater Type EL for reheating the airflow
  • Actuator for switching between setpoint values

leer más

layer

Type VFC

 

Circular mechanical self-powered volume flow controllers for the control of supply air or extract air in constant air volume systems with low airflow velocities

  • Suitable for airflow velocities from 0.8 m/s
  • Very simple commissioning
  • Volume flow rate can be set using a rotary knob and a scale on the outside of the casing
  • Simple retrofit of an actuator for variable volume flows
  • Any installation orientation; maintenance-free
  • Casing air leakage to EN 1751, class C


Optional equipment and accessories

  • Secondary silencer Type CA, CS or CF for the reduction of air-regenerated noise
  • Hot water heat exchanger Type WL and electric air heater Type EL for reheating the airflow
  • Actuator for variable volume flows or for Vmin / Vmax switching

leer más

layer

Type VFL

 

Circular, mechanical self-powered controllers for insertion into ducting, for the quick and easy balancing of constant volume flow rates in ventilation and air conditioning systems

  • Unique damper blade edge for acoustic optimisation
  • Simple and quick commissioning on site
  • Range of volume flow rate setpoints for each nominal size
  • Precise and simple setting of volume flow rates using a scale
  • Best accuracy among controllers for insertion
  • Suitable for low airflow velocities from 0.8 m/s
  • Any installation orientation; maintenance-free

leer más

layer

Type EN

 

Rectangular self-powered volume flow controllers for the control of supply air or extract air in constant air volume systems

  • Suitable for volume flow rates up to 12,096 m³/h or 3,360 l/s
  • Volume flow rate can be set using an external scale, no tools required
  • High control accuracy
  • No on-site test measurements required for commissioning
  • Suitable for airflow velocities of up to 8 m/s
  • Casing air leakage to EN 1751, class C


Optional equipment and accessories

  • Acoustic cladding for the reduction of case-radiated noise
  • Secondary silencer Type TX for the reduction of air-regenerated noise
  • Hot water heat exchanger Type WT for reheating the airflow
  • Actuator for switching between setpoint values

leer más

Compartir

Recomendar

Recomendar el contenido de esta página, mandar por mail.

Los campos marcados con un (*) sin imprescindibles de cumplimentar

Compartir

Gracias por su recomendación!

Su recomendación ha sido enviada y llegará a su destino en breve.


Contacto

Estamos aquí para atenderles

Visual contact Visual contact

Por favor mande su solicitud
Tel.: +34 976 50 02 50 | Fax: +34 976 50 09 04

Los campos marcados con un (*) sin imprescindibles de cumplimentar

Contacto

Gracias por su mensaje.

Visual contact Visual contact

Su mensaje ha sido enviado correctamente, en breve será atendido.
En seguida nos pondremos en contacto con Vd.
Para información general sobre productos o servicios, por favor llamar al:
Tel.: +34 976 50 02 50 | Fax: +34 976 50 09 04

Contacto

Estamos aquí para atenderles

Visual contact Visual contact

Por favor mande su solicitud
Tel.: +34 976 50 02 50 | Fax: +34 976 50 09 04

Archivo adjunto (Max. 10MB)

Los campos marcados con un (*) sin imprescindibles de cumplimentar

Contacto

Gracias por su mensaje.

Visual contact Visual contact

Su mensaje ha sido enviado correctamente, en breve será atendido.
En seguida nos pondremos en contacto con Vd.
Para información general sobre productos o servicios, por favor llamar al:
Tel.: +34 976 50 02 50 | Fax: +34 976 50 09 04