Type EM-TRF-USV

For the connection of EASYLAB to the 230 V mains and for uninterruptible power supply

 

Expansion module for the direct connection of EASYLAB controllers Type TCU3 and adapter modules Type TAM to the 230 V mains, including uninterruptible power supply

  • Double-stack terminal blocks for 230 V supply voltage connection
  • Electric plug connection to the main PCB
  • The expansion module is fitted into the casing with the EASYLAB base component
  • Uninterruptible power supply for the connected modules
  • Integral battery charging electronics with charge status indicator
  • Power failure is signalled to the EASYLAB control panels
  • Controller action in case of a power failure can be defined
small_tab1_Serie EM-TRF-USV
  • Application
  • Description

Application

  • Expansion module Type EM-TRF-USV for the EASYLAB system
  • For the connection of EASYLAB base components (controller TCU3 or adapter module TAM) to the 230 V AC supply voltage (mains)
  • Power supply for the base component and the connected modules
  • Battery pack ensures uninterrupted power supply even in case of a mains power failure
  • Control and/or alarm signalling even in case of a power failure
  • Factory mounted or for retrofitting into the EASYLAB base component casing

Special characteristics

  • Ready for installation, can be easily connected to the main PCB
  • Double-stack terminal blocks for 230 V AC supply voltage connection
  • Simple electrical connection of expansion module and EASYLAB main PCB using a connection plug
  • Simple wiring of switch-operated fume cupboard lighting in combination with the EM-LIGHT expansion module
  • Intelligent charge control with trickle charging, deep discharge protection, and reverse voltage protection
  • Operating state indicator light
  • Controlled response in case of a power failure can be defined (EASYLAB TCU3 with expansion module EM-TRF-USV)
  • In case of a power failure: Optical signal on the control panel; configurable alarm signalling

Parts and characteristics

  • Mains transformer 230 V AC (primary), 24 V AC (secondary)
  • Intelligent charge control with trickle charging, deep discharge protection, and reverse voltage protection
  • Operating state indicator light
  • PCB plug connector to connect the module to the EASYLAB main PCB

Useful additions

  • EasyConnect: Configuration software for the commissioning and diagnosis of EASYLAB components

Construction features

  • PCB dimensions and fixing points correspond to the EASYLAB main PCB and the casing
  • Fixing with screws
  • Double-stack terminal blocks for simply 230 V supply voltage connection

Información técnica

  • Function
  • Technical data
  • Specification text
  • Order code
em-trf-usv
em-trf-usv

 

Expansion module for the EASYLAB base component (controller TCU3 or adapter module TAM) that can be directly connected to a 230 V AC supply voltage. The expansion module includes a transformer whose secondary voltage (24 V) is equal to the supply voltage for the controller and the expansion modules connected to it.

Uninterruptible power supply (UPS) by means of a battery pack that maintains defined functions in case of a power failure.

Special characteristics

  • Ready for installation, can be easily connected to the main PCB
  • Double-stack terminal blocks for 230 V AC supply voltage connection
  • Simple electrical connection of expansion module and EASYLAB main PCB using a connection plug
  • Simple wiring of switch-operated fume cupboard lighting in combination with the EM-LIGHT expansion module
  • Intelligent charge control with trickle charging, deep discharge protection, and reverse voltage protection
  • Operating state indicator light
  • Controlled response in case of a power failure can be defined (EASYLAB TCU3 with expansion module EM-TRF-USV)
  • In case of a power failure: Optical signal on the control panel; configurable alarm signalling

Technical data

  • Supply voltage: 230 V AC ± 10 %, 50/60 Hz
  • Power consumption: up to 40 VA for a controller with all expansion modules; up to 35 VA for a fume cupboard controller with control panel; up to 33 VA for a room controller with control panel; up to 29 VA for a room controller without control panel; up to 9 VA for an EASYLAB adapter module TAM
  • Operation in case of a power failure: One controller (TCU3 or TAM) with control panel, standard operation will be maintained for approx. 4.5 h, defined damper blade positions and power failure signalling will be maintained for approx. 6 h
  • Battery pack charging: 1500 mA
  • Battery life: up to 4 years
  • Double-stack terminal blocks: Cable cross-section up to 2.5 mm²
  • Protection level: IP 20
em-trf-usv

Compartir

Recomendar

Recomendar el contenido de esta página, mandar por mail.

Los campos marcados con un (*) sin imprescindibles de cumplimentar

Compartir

Gracias por su recomendación!

Su recomendación ha sido enviada y llegará a su destino en breve.


Contacto

Estamos aquí para atenderles

Visual contact Visual contact

Por favor mande su solicitud
Tel.: +34 976 50 02 50 | Fax: +34 976 50 09 04

Los campos marcados con un (*) sin imprescindibles de cumplimentar

Contacto

Gracias por su mensaje.

Visual contact Visual contact

Su mensaje ha sido enviado correctamente, en breve será atendido.
En seguida nos pondremos en contacto con Vd.
Para información general sobre productos o servicios, por favor llamar al:
Tel.: +34 976 50 02 50 | Fax: +34 976 50 09 04

Contacto

Estamos aquí para atenderles

Visual contact Visual contact

Por favor mande su solicitud
Tel.: +34 976 50 02 50 | Fax: +34 976 50 09 04

Archivo adjunto (Max. 10MB)

Los campos marcados con un (*) sin imprescindibles de cumplimentar

Contacto

Gracias por su mensaje.

Visual contact Visual contact

Su mensaje ha sido enviado correctamente, en breve será atendido.
En seguida nos pondremos en contacto con Vd.
Para información general sobre productos o servicios, por favor llamar al:
Tel.: +34 976 50 02 50 | Fax: +34 976 50 09 04