Type TVRK

For contaminated air

 

Plastic circular VAV terminal units for aggressive extract air in variable air volume systems

  • Casing and damper blade made of flame-resistant polypropylene
  • Slide-out differential pressure sensor allows for easy cleaning
  • Suitable for the control of volume flow rate, room pressure or duct pressure
  • Electronic control components for different applications (Universal and LABCONTROL)
  • Suitable for airflow velocities up to 13 m/s
  • Closed blade air leakage to EN 1751, class 3
  • Casing air leakage to EN 1751, class B


Optional equipment and accessories

  • With flanges on both ends
  • Matching flanges for both ends
  • Plastic secondary silencer Type CAK for the reduction of air-regenerated noise
small_tab1_Serie TVRK
  • Application
  • Description

Application

  • Circular VARYCONTROL VAV terminal units of Type TVRK, made of plastic, preferably for the extract air flow control in variable air volume systems
  • Closed-loop volume flow control using an external power supply
  • Suitable for contaminated air
  • Shut-off by means of switching (equipment supplied by others)

Special features

  • Integral slide-out differential pressure sensor with 3 mm measuring holes (resistant to dust and pollution)
  • Factory set-up or programming and aerodynamic function testing
  • Volume flow rate can later be measured and adjusted on site; additional adjustment device may be necessary

Variants

  • TVRK: VAV terminal unit
  • TVRK-FL: VAV terminal unit with flanges on both ends

Parts and characteristics

  • Ready-to-commission unit which consists of mechanical parts and control components.
  • Averaging differential pressure sensor for volume flow rate measurement; can be removed for cleaning
  • Damper blade
  • Factory-assembled control components complete with wiring and tubing
  • Aerodynamic function testing on a special test rig prior to shipping of each unit
  • Set-up data is given on a label or volume flow rate scale affixed to the unit
  • High control accuracy (even with upstream bend R = 1D)

Attachments

  • Universal controller: Controller, differential pressure transducer and actuators for special applications
  • LABCONTROL: Control components for air management systems

Accessories

  • Matching flanges for both ends

Useful additions

  • Plastic secondary silencer Type CAK for demanding acoustic requirements

Construction features

  • Circular casing
  • Spigot suitable for ducts according to DIN 8077
  • Both spigots with same diameter
  • Position of the damper blade indicated externally at shaft extension

Materials and surfaces

  • Casing and damper blade made of flame-resistant polypropylene (PPs)
  • Differential pressure sensor and plain bearings made of polypropylene (PP)
  • Damper blade seal made of chloroprene rubber (CR)

Información técnica

  • Function
  • Technik
  • Quick sizing
  • Specification text
  • Order code
tvrk

Functional description

The VAV terminal unit is fitted with a differential pressure sensor for measuring the volume flow rate.

The control components (attachments) include a differential pressure transducer that transforms the differential pressure (effective pressure) into an electric signal, a controller, and an actuator; the control functions can be achieved with individual components (Universal or LABCONTROL).

For most applications, the setpoint value comes from an external setpoint adjuster.

The controller compares the actual value with the setpoint value and alters the control signal of the actuator if there is a difference between the two values.

tvrk
tvrk

 

Circular VAV terminal units made of PPs plastic, for variable and constant air volume systems, suitable for extract air, available in 6 nominal sizes.

High control accuracy (even with upstream bend R = 1D).

Ready-to-commission unit which consists of the mechanical parts and the electronic control components. Each unit contains an averaging differential pressure sensor for volume flow rate measurement and a damper blade. Factory-assembled control components complete with wiring and tubing.

Differential pressure sensor with 3 mm measuring holes (resistant to dust and pollution)

Spigot, suitable for ducts according to DIN 8077.

Position of the damper blade indicated externally at shaft extension.

Closed blade air leakage to EN 1751, class 3.

Casing air leakage to EN 1751, class B.

Hygiene conforms to VDI 6022

Special features

  • Integral slide-out differential pressure sensor with 3 mm measuring holes (resistant to dust and pollution)
  • Factory set-up or programming and aerodynamic function testing
  • Volume flow rate can later be measured and adjusted on site; additional adjustment device may be necessary

Materials and surfaces

  • Casing and damper blade made of flame-resistant polypropylene (PPs)
  • Differential pressure sensor and plain bearings made of polypropylene (PP)
  • Damper blade seal made of chloroprene rubber (CR)

Technical data

  • Nominal sizes: 125 – 400 mm
  • Volume flow rate range: 25 to 1680 l/s or 90 to 6048 m³/h
  • Volume flow rate control range: approx. 17 – 100 % of the nominal volume flow rate
  • Differential pressure: 5 – 1500 Pa

Attachments

Variable volume flow control with electronic Universal controller to switch an external control signal and an actual value signal for integration into the central BMS.

  • Supply voltage 24 V AC/DC
  • Signal voltages 0 – 10 V DC or 2 – 10 V DC
  • Possible override controls with external switches using volt-free contacts: CLOSED, OPEN, Vmin and Vmax
  • Volume flow rate approx. 17 – 100 % of the nominal volume flow rate
tvrk

Compartir

Recomendar

Recomendar el contenido de esta página, mandar por mail.

Los campos marcados con un (*) sin imprescindibles de cumplimentar

Compartir

Gracias por su recomendación!

Su recomendación ha sido enviada y llegará a su destino en breve.


Contacto

Estamos aquí para atenderles

Visual contact Visual contact

Por favor mande su solicitud
Tel.: +34 976 50 02 50 | Fax: +34 976 50 09 04

Los campos marcados con un (*) sin imprescindibles de cumplimentar

Contacto

Gracias por su mensaje.

Visual contact Visual contact

Su mensaje ha sido enviado correctamente, en breve será atendido.
En seguida nos pondremos en contacto con Vd.
Para información general sobre productos o servicios, por favor llamar al:
Tel.: +34 976 50 02 50 | Fax: +34 976 50 09 04

Contacto

Estamos aquí para atenderles

Visual contact Visual contact

Por favor mande su solicitud
Tel.: +34 976 50 02 50 | Fax: +34 976 50 09 04

Archivo adjunto (Max. 10MB)

Los campos marcados con un (*) sin imprescindibles de cumplimentar

Contacto

Gracias por su mensaje.

Visual contact Visual contact

Su mensaje ha sido enviado correctamente, en breve será atendido.
En seguida nos pondremos en contacto con Vd.
Para información general sobre productos o servicios, por favor llamar al:
Tel.: +34 976 50 02 50 | Fax: +34 976 50 09 04