small_tab1_Serie MFE
small_tab1_Serie MFE
Configurar ahora

Type MFE

Very compact, for modular installation

 

Prefilters or final filters for the separation of fine dust, or particulate filters for the most critical requirements in ventilation systems

  • Filter classes F9, E11, H13
  • Performance data to EN 779 or EN 1822
  • Eurovent certification for fine dust filters
  • Filter media for special requirements, made of glass fibre papers, with spacers made of textile threads
  • Low initial differential pressure due to ideal pleat position and largest possible filter area
v2.7.1.4
Actualizando el código de pedido
Guardar la configuración
Calculando precio
Clasificación del filtro
ePM1
E11
H13
Ejecución
GAL
AL
Anchura
86,5
600
Altura
65
202
303
Profundidad
202
600
Actualizando los datos técnicos
Texto para especificación: MFE-H13-GAL/600x65x202
Actualizando el texto para especificación

Mini Pleat filter elements MFE for the separation of fine dust and suspended particles such as aerosols, toxic dusts, viruses and bacteria from the supply and extract air in ventilation systems. .
Use as fine dust filters, i.e. as prefilters or final filters in ventilation systems; or as particulate filters, i.e. main or final filters for the most critical requirements of air cleanliness and sterility in areas such as industry, research, medicine, pharmaceuticals, and nuclear engineering.
Large volume flow rates and long filter life due to the very compact, modular structure.
The filter medium is made of high-quality, moisture-resistant glass fibre papers, with spacers.
Low initial differential pressure due to ideal pleat position and largest possible filter area.
Mini Pleat filter elements available in market sizes, filter groups ISO ePM1 (fine dust filter) and EPA, HEPA (particulate filter).
The filter elements are joined together by a special adhesive tape which also provides an air-tight seal between the filter elements and the mounting frame or installation casing.
The special adhesive tape must be ordered separately.
Mini Pleat filter elements used as fine dust filters are certified by Eurovent.

VARIANTE
H13 Clasificación del filtro: Filtro absoluto en cumplimiento con EN 1822
GAL Ejecución: Marco de acero galvanizado
600 Anchura: 600
65 Altura : 65
202 Profundidad: 202

DATOS DEL PRODUCTO
Caudal de aire qv 200 m³/h
Pérdida de carga inicial Δpi 161 Pa
Anchura de filtro Bf 600 mm
Altura del filtro Hf 65 mm
Profundidad del filtro Tf 202 mm
Superficie media filtrante Afm 3,6 m²
Caudal nominal de aire qv,nom 200 m³/h
Pérdida de carga inicial nominal Δpi,nom 160 Pa

Manufacturer: TROX GmbH
Type: MFE-H13-GAL/600x65x202

Mostrar texto completo Ocultar texto completo

Application

Application

  • Mini Pleat filter element type MFE for the separation of fine dust and suspended particles such as aerosols, toxic dusts, viruses and bacteria from the supply and extract air in ventilation systems with large volume flow rates and the requirement for long filter life
  • Fine dust filter: Prefilter or final filter for the separation of fine dust in ventilation systems.
  • Particulate filter: Main or final filter used for the most critical requirements of air cleanliness and sterility in areas such as industry, research, medicine, pharmaceuticals, and nuclear engineering

Special characteristics

  • Leakage test, standard for all particulate filters of filter class H13

Description

Filter classes

  • Fine dust filter F9
  • Particulate filters E11, H13

Construction

  • GAL: Frame made of galvanised steel
  • AL: Frame made of aluminium

Accessories

  • Adhesive tape for sealing off the filter elements, width: 19 mm, length: 55 m
  • Order number: ACC-AT
  • One roll suffices for about 50 filter elements of size 600 × 65 × 202 mm, for about 100 filter elements of size 86.5 × 202 × 600 mm, or for about 70 filter elements of size 86.5 × 303 × 600 mm

Construction features

  • The filter elements are joined together by a special adhesive tape which also provides an air-tight seal between the filter elements and the mounting frame or installation casing
  • The special adhesive tape for sealing off the filter elements must be ordered separately

Materials and surfaces

  • Filter media made of high-quality, moisture-resistant glass fibre papers, pleated
  • Spacers provide a uniform spacing of the pleats
  • Joint sealing compound made of permanently elastic two-component polyurethane adhesive
  • Frame made of either galvanised sheet steel or aluminium

Información técnica

  • Function
  • Specification text
  • Order code
mfe

 

Mini Pleat filter elements MFE for the separation of fine dust and suspended particles such as aerosols, toxic dusts, viruses and bacteria from the supply and extract air in ventilation systems.

Use as fine dust filters, i.e. as prefilters or final filters in ventilation systems; or as particulate filters, i.e. main or final filters for the most critical requirements of air cleanliness and sterility in areas such as industry, research, medicine, pharmaceuticals, and nuclear engineering.

Large volume flow rates and long filter life due to the very compact, modular structure. Filter medium is made of high-quality, moisture-resistant glass fibre papers, with spacers.

Low initial differential pressure due to ideal pleat position and largest possible filter area.

Mini Pleat filter elements are available in all commercial sizes, filter classes F9, E11, H13.

The filter elements are joined together by a special adhesive tape which also provides an air-tight seal between the filter elements and the mounting frame or installation casing.

The special adhesive tape must be ordered separately.

Mini Pleat filter elements used as fine dust filters are certified by Eurovent.

Special characteristics

  • Leakage test, standard for all particulate filters of filter class H13

Materials and surfaces

  • Filter media made of high-quality, moisture-resistant glass fibre papers, pleated
  • Spacers provide a uniform spacing of the pleats
  • Joint sealing compound made of permanently elastic two-component polyurethane adhesive
  • Frame made of either galvanised sheet steel or aluminium

Construction

  • GAL: Frame made of galvanised steel
  • AL: Frame made of aluminium

Sizing data

  • Filter class
  • Volume flow rate [m³/h]
  • Initial differential pressure [Pa]
  • Nominal size [mm]
mfe

Descargas

Información sobre el producto

Compartir la página

Recomendar la página

La página puede ser recomendada compartiendo este enlace.

Los campos marcados con un asterísco (*) son de obligado cumplimiento.

Contacto

¡Gracias por su mensaje!

Su recomendación ha sido remitida con éxito.

Contacto

Estamos aquí para ayudarle

Visual contact Visual contact

Por favor indique el asunto de su consulta y sus datos de contacto.
Tel.: +34 976 50 02 50 | Fax: +34 976 50 09 04

Los campos marcados con un asterísco (*) son de obligado cumplimiento.

Contacto

¡Gracias por su mensaje!

Visual contact Visual contact

Su mensaje se ha recibido con éxito en el buzón del SAT de TROX.
En seguida nos pondremos en contacto con usted.
En caso de que disponga de cuestiones adicionales, puede contactar con nosotros en: Tel.: +34 976 50 02 50 | Fax: +34 976 50 09 04

Contacto

Estamos aquí para ayudarle

Visual contact Visual contact

Por favor indique el asunto de su consulta y sus datos de contacto.
Tel.: +34 976 50 02 50 | Fax: +34 976 50 09 04

Adjunto (máx. 10MB)

Los campos marcados con un asterísco (*) son de obligado cumplimiento.

Contacto

¡Gracias por su mensaje!

Visual contact Visual contact

Su mensaje se ha recibido con éxito en el buzón del SAT de TROX.
En seguida nos pondremos en contacto con usted.
En caso de que disponga de cuestiones adicionales, puede contactar con nosotros en: Tel.: +34 976 50 02 50 | Fax: +34 976 50 09 04