Application
Special characteristics
Variants
Useful additions
Materials and surfaces
Control panel with colour touch screen
Functional description
The X-AIR-CP-2T control panel is user friendly and offers room occupants maximum comfort, yet energy consumption is low. The 2" colour touch screen is an easy-to-handle user interface for the X-AIRCONTROL single room control system.
The control panel includes a temperature sensor.
Users can easily adjust the room temperature setpoint and the air change rate on the touch screen.
The control unit includes a real time clock, which allows users to set weekly schedules. Times can be set directly on the touch screen. If a user selects one of the temporary operating modes 'Minimum volume flow rate' or 'Maximum volume flow rate' and if a timer function is used, the system returns to Automatic mode a certain time (can be defined) after the temporary operating mode has been selected.
The zone module automatically recognises the control panel (plug and play).
Configuration for stand-alone solutions
In systems without a zone master module the room control panel is used to configure zone modules. Access to the configuration parameters is password protected.
Control panel with setpoint value adjuster
Functional description
The X-AIR-CP-TS control panel allows users to change the room temperature setpoint value. This is only possible, however, if a zone master module is used with X-AIRCONTROL.
The control panel includes a temperature sensor.
A setpoint value adjuster allows users to adjust the room temperature setpoint value by ± 5 K. The adjustment range can be configured with the zone master module.
The zone module automatically recognises the control panel (plug and play).
X-AIR-CP-2T
Supply voltage | 24 V DC ± 10%, from the zone module |
Power rating | 0.775 W without external sensors |
Rating in Standby mode | 0.5 W |
External input 1, CO2 sensor | 0 – 10 V DC correspond to 0 – 2000 ppm, including power supply to sensors; screw terminals 1 mm² max. |
Exernal input 2, humidity sensor | 0 – 10 V DC correspond to 0 – 100% relative humidity, including power supply to sensors; screw terminals 1 mm² max. |
Interface to zone module | Modbus, AWG 26/6 C data cable, RJ12 plug (6P6C), 30 m max. |
Operating temperature | – 10 to 40 °C |
Max. humidity | 0 – 95% rh, no condensation |
IEC protection class | III (protective extra-low voltage) |
Protection level | IP 21 |
EC conformity | EMC to 2014/30/EU, ROHS 2011/65/EU |
Installation location | Wall installation on a Ø60 mm junction box |
Dimensions | 82 × 82 × 41 mm |
Weight | 76 g |
X-AIR-CP-TS
Supply voltage | 10 V DC, from the zone module |
Temperature sensor | PT1000 |
Setpoint value adjuster | 10 kΩ |
Interface to zone module | Modbus, screw terminals, 1.5 mm² max., 30 m max. |
Operating temperature | – 10 to 50 °C |
Max. humidity | 0 – 95% rh, no condensation |
IEC protection class | III (protective extra-low voltage) |
Protection level | IP 30 |
EC conformity | EMC to 2014/30/EU, ROHS 2011/65/EU |
Installation location | Wall installation on a Ø60 mm junction box |
Dimensions | 82 × 84 × 28 mm |
Weight | 74 g |
Control panel with colour touch screen
Control panels for use with the X-AIRCONTROL single room control system, to be connected to zone modules.
Ready-to-operate unit which consists of a 2" colour touch screen with an easy-to-handle user interface, a room temperature sensor and a real time clock.
Users can easily adjust the room temperature setpoint and the air change rate on the touch screen. Weekly schedules and other timer functions can also be set on the touch screen. If a user selects one of the temporary operating modes 'Minimum volume flow rate' or 'Maximum volume flow rate' and if a timer function is used, the system returns to Automatic mode a certain time (can be defined) after the temporary operating mode has been selected.
Used to configure zone modules in systems without a zone master module. Access to the configuration parameters is password protected.
The zone module automatically recognises the control panel (plug and play).
The control panel is suitable for installation on a Ø60 mm junction box.
Special characteristics
Materials and surfaces
Technical data
Control panel with setpoint value adjuster
Control panels for use with the X-AIRCONTROL single room control system, to be connected to zone modules.
Ready-to-operate unit for use in control systems with zone master modules; the unit consists of a room temperature sensor and of a setpoint value adjuster.
The setpoint value adjuster is used to adjust the room temperature setpoint value by ± 5 K. The adjustment range can be configured with the zone master module.
The zone module automatically recognises the control panel (plug and play).
The control panel is suitable for installation on a Ø60 mm junction box.
Special characteristics
Materials and surfaces
Technical data
Application
Parts and characteristics
Application
Parts and characteristics
Installation and commissioning
X-AIR-CP-2T
X-AIR-CP-TS
Compartir la página
Recomendar la página
La página puede ser recomendada compartiendo este enlace.
Contacto
¡Gracias por su mensaje!
Su recomendación ha sido remitida con éxito.
Contacto
Estamos aquí para ayudarle
Por favor indique el asunto de su consulta y sus datos de contacto.
Tel.: +34 976 50 02 50 | Fax: +34 976 50 09 04
Contacto
¡Gracias por su mensaje!
Su mensaje se ha recibido con éxito en el buzón del SAT de TROX.
En seguida nos pondremos en contacto con usted.
En caso de que disponga de cuestiones adicionales, puede contactar con nosotros en: Tel.: +34 976 50 02 50 | Fax: +34 976 50 09 04
Contacto
Estamos aquí para ayudarle
Por favor indique el asunto de su consulta y sus datos de contacto.
Tel.: +34 976 50 02 50 | Fax: +34 976 50 09 04
Contacto
¡Gracias por su mensaje!
Su mensaje se ha recibido con éxito en el buzón del SAT de TROX.
En seguida nos pondremos en contacto con usted.
En caso de que disponga de cuestiones adicionales, puede contactar con nosotros en: Tel.: +34 976 50 02 50 | Fax: +34 976 50 09 04