The TR2MOVE-SELF ventilation grilles are supply air outletswhose horizontal blades are adjusted by a temperature sensor. This results in a self-powered, temperature-dependent air direction control for temperature differences (ΔT) between the supply air and the indoor air. Ventilation grilles with adjustable blades allow for adapting the air direction control to the local conditions. The result is a mixed flow ventilation in comfort zones and industrial zones, with good overall room ventilation. Due to induction, the airflow velocity of the supply air flow decreases with increasing distance from the ventilation grille. The distance at which the airflow velocity reaches a certain defined value, e.g. 0.35 m/s, is called throw distance. The supply air flow from wall grilles that are arranged close the ceiling achieves a greater throw distance than a comparable free jet (without ceiling influence), due to the ceiling effect. Single grilles, groups of grilles and linear run sections all achieve different throw distances. In cooling mode, it is necessary to consider the jet deflection towards the occupied zone, which increases as the supply air to room air temperature difference increases and the discharge velocity decreases. In heating mode, the supply air jet is deflected towards the ceiling. This has no negative effect on the airflow velocity in the occupied zone, but it may affect the overall ventilation of the room.
Nominal sizes | 325 × 125 - 1225 × 225 mm |
Minimum volume flow rate | 23 – 275 l/s or 163 – 912 m³/h |
Maximum volume flow rate, with LWA max. 50 dB(A) without attachments | 178 – 1000 l/s or 640 – 3603 m³/h |
Supply air temperature | -12 to +4 K |
Geometric free area A [m2]
H/B | 325 | 425 | 525 | 625 | 825 | 1025 | 1225 |
125 | 0.023 | 0.031 | 0.039 | 0.046 | 0.062 | 0.069 | 0.069 |
225 | 0.046 | 0.062 | 0.077 | 0.092 | 0.123 | 0.139 | 0.139 |
Effective air inflow area supply air A [m2]
H/B | 325 | 425 | 525 | 625 | 825 | 1025 | 1225 |
125 | 0.022 | 0.030 | 0.037 | 0.045 | 0.060 | 0.067 | 0.067 |
225 | 0.045 | 0.060 | 0.075 | 0.090 | 0.120 | 0.135 | 0.135 |
Specification text
TR2MOVE | – | R | – | – | V | – | SELF | – | BL | / | 825 x 225 | / | L34 | / | AG | / | / | 44 | / | P1 - RAL 9016 | ||
| | | | | | | | | | | | | | | | | | | | | | | | |||||||||||
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
TR2MOVE Ventilation grille TR2MOVE
No entry: installation into walls, sills or ducts
R Installation into circular ducts (large duct diameters)
RA Installation into circular ducts with small Ø and additional bend (small duct diameters)
No entry required: profile 25 × 40 mm with bevelled edge
V Vertical front blade
5 Adjustment
VAR Electric variable adjustment
SELF Thermally self-powered adjustment
6 Ball impact protection grille
No entry required: without ball impact protection
BS With ball impact protection without fixing holes
BL With ball impact protection with fixing holes
8 Actuator/temperatur sensor
Only with VAR adjustment
L1 External Actuator on the left, concealed supply
L2 Internal Actuator on the left, concealed supply
L3 External actuator on the left, visible supply
L4 Internal actuator on the left, visible supply
R1 External actuator on the right, concealed supply
R2 Internal actuator on the right, concealed supply
R3 External actuator on the right, visible supply
R4 Internal actuator on the right, visible supply
Only with SELF adjustment
L34 Temperature sensor left, 10 - 34 °C
L50 Temperature sensor left, 10 - 50 °C
R34 Temperature sensor right, 10 - 34 °C
R50 Temperature sensor right, 10 - 50 °C
No entry required: without attachment (front grille only)
AG Damper blade, opposed action blades
AS Hit and miss damper (parallel slide damper)
SAS Slanted hit and miss damper
10 Fixing
No entry required: countersunk holes in the front border
NO No factory-fitted mounting option (unperforated front border)
11 Air discharge
No entry required: air direction control 0°
44 Air direction control 44°
84 Air direction control 84°
110 Air direction control 110°
GEG Opposed
12 Surface
No entry required: galvanised steel
P0 Powder-coated, RAL 9010 (pure white), GU 50
P1 Powder-coated, specify RAL CLASSIC colour, gloss level
PS powder-coated, specify NCS colour and gloss level
Order example: TR2MOVE-R-V-SELF-BL/825x225/L34/AG/44/P1-RAL9016
Type | TR2MOVE – Ventilation grille TR2MOVE |
Construction | Installation into circular ducts (large duct diameters) |
Front border | Profile 25 x 40 mm with bevelled edge |
Blade arrangement | Vertical front blade |
Adjustment | Thermally self-powered adjustment |
Ball impact protection | with ball impact protection with fixing holes |
Nominal size [mm] | Width 825, height 225 |
Actuator/temperature sensor | Temperature sensor left, 10 - 34 °C |
Attachment | Damper blade, opposed action blades |
Air discharge | Air direction control 44° |
Surface | Powder-coated, RAL 9016 (traffic white), GU 70 |
Compartir la página
Recomendar la página
La página puede ser recomendada compartiendo este enlace.
Contacto
¡Gracias por su mensaje!
Su recomendación ha sido remitida con éxito.
Contacto
Estamos aquí para ayudarle
Por favor indique el asunto de su consulta y sus datos de contacto.
Tel.: +34 976 50 02 50 | Fax: +34 976 50 09 04
Contacto
¡Gracias por su mensaje!
Su mensaje se ha recibido con éxito en el buzón del SAT de TROX.
En seguida nos pondremos en contacto con usted.
En caso de que disponga de cuestiones adicionales, puede contactar con nosotros en: Tel.: +34 976 50 02 50 | Fax: +34 976 50 09 04
Contacto
Estamos aquí para ayudarle
Por favor indique el asunto de su consulta y sus datos de contacto.
Tel.: +34 976 50 02 50 | Fax: +34 976 50 09 04
Contacto
¡Gracias por su mensaje!
Su mensaje se ha recibido con éxito en el buzón del SAT de TROX.
En seguida nos pondremos en contacto con usted.
En caso de que disponga de cuestiones adicionales, puede contactar con nosotros en: Tel.: +34 976 50 02 50 | Fax: +34 976 50 09 04